WELDING AND NDT SUPERVISOR - WELDNDTSUPVONSHANG

MISSIONS

The Service holder is responsible, within the FPSO team and under the Lower Turret QA/QC Superintendent's supervision, for following-up, monitoring and supervising Welding and NDT activities carried out by FPSO Contractor and Subcontractor at the Angolan Construction yards during the Construction, Integration, Pre-commissioning and Commissioning phases, ensuring that his discipline's contractual and technical requirements are duly applied by FPSO Contractor and/or Subcontractors.

In this respect, and to ascertain that the facilities are built as per the project requirements, the Service holder, in the perimeter of his discipline, verifies and comments Contractor's and/or Subcontractors' drawings, fabrication procedures and methodologies, welding map, welding and NDT procedures, and ensure that Contractor and/or Subcontractors have adequate equipment, resources, means and manpower to performed the Service with the required quality level and to compete it in due time. He is also closely monitoring the storage and consumption of welding consumables. He reports on a day-to-day basis directly to his QA/QC Superintendent.

The Service holder participates to routine and random inspections and audits, assists to daily / regular Construction meetings related to his discipline with FPSO Contractor and/or Subcontractors, performs QA/QC and/or HSE visits and tours as required... and ensures an adequate reporting to the QA/QC Superintendent (areas of concerns, problems encountered in its discipline during construction and/or implementation by FPSO Contractor and/or Subcontractors).

As a general manner, the Service holder provides assistance to Company Construction team for all matters related to his discipline in accordance with instructions provided by his discipline Superintendent and is accountable for demonstrating, individually, an exemplary behavior with regard to HSSE rules & requirements.

ACTIVITIES

1. To adopt and to demonstrate an exemplary behavior with regard to Company Ethics and “Code of Conduct” policy and HSSE rules and regulations.

2. To have knowledge of the project technical referential and international standards related to his area of responsibility, taking knowledge from them for application to the Project. To apply, as required, Discipline specific instructions at Construction Site.

3. To support and enforce the Project Quality management system and promote the Project quality policies and objectives

4. To ensure all along construction and fabrication phases that the FPSO Contractor is enforcing his contractual commitments, is implementing properly his construction plan and objectives, and is performing safely his activities as per Project specifications, design and codes.

As such, he shall:

- Review the relevant Contractor's and suppliers ITP's and procedures (in coordination with other disciplines);

- Attend welders tests qualification and monitor at yard that only qualified welders are used for the tasks

- Monitor and control the implementation on site of the approved drawings and plans, Surveillance plans, Inspection and test plans, WPS, PWHT...

- Ensure that the works are closely inspected by the contractor's QC inspection team (e.g. RT, UT, MPI, PMI, etc.) and he will perform visual inspection of welds

- Review and ensure that all material certificates and certification files are up to date, including documentation from vendors and contractors;

- Monitor the work deficiencies, and ensure the implementation of the necessary corrective actions;

- Be in possession of welding gauges and others tools in order for him to perform his tasks without the assistance of CTR;

- Monitor CTR organization and advise, if necessary, mitigation measures to improve CTR productivity

- Follow up on the implementation of decided action plans, or other mitigation plan issued;

- Stop & report immediately to QA/QC Superintendent any anomaly or non-conformity;

- Interface with relevant Construction team or QA/QC site authority on QA/QC issues and on the implementation of the Company QA/QC requirements;

- Attend and participate in daily discipline meetings or various construction meetings, and provide support to the Superintendent in its various reviews

- Participate to construction, HSE or QAQC specific audits or visits; Provide regular inspection & activity reports.

5. To ensure the tracking of anomalies and non-conformities performed by the FPSO Contractor and ensure a correct follow-up of corrective actions.

6. In General:

- To assist his discipline Superintendent as and when required;

- To provide technical support and assistance to any query related to his discipline

- To implement his discipline methods for the supervision of the day to day activities;

- To enforce decisions/directions taken at FPSO Management level and as directed by his discipline Superintendent.

7. To report to the QA/QC Superintendent Discipline activities, in particular when deviations to works are detected.

8. To ensure confidentiality of all the documentation issued under his area of responsibility.

OBSERVATIONS ON ACTIVITIES AND MISSIONS

Due to the large amount of work on the yard, the tight schedule for the lower turrets fabrication and the reduced size of the construction supervision team, the Service holder must have a strong knowledge of his activities and the ability to analyses and evaluate the critical parts of his activities in order to organize properly his team and to focus the spot checking on the main critical subjects

SERVICE DIMENSIONS

Project Duration: 4/5 years from FID

REQUIRED COMPETENCIES

? Welding/Material/NDE techniques and experience  

? Knowledge of Project referential

? Construction Auditing techniques

? Knowledge of yard and shipyard activities

? Naval & Marine structures

? Team relationship

? FPSO constructions techniques

? Use of software's: word, excel, email

? Knowledge of International codes relevant to his discipline

REQUIRED QUALIFICATIONS AND BACKGROUND

Professional Experience (years): min 10 years

(Level 1) in welding activities

Experience in similar position (years): mini 7 in similar role or on Turret fabrication

Level / Diploma: Welding Engineer, or CSWIP3.2 equivalent

Languages: English mandatory

OTHER OBSERVATIONS ON THE SPECIFICITIES OF THE SERVICE

Base location: Angolan Yards